*replacentitywithentity

Replaces a single component.

Syntax

*replacentitywithentity mode entity_type existing_id incoming_id string_array number_of_strings

Type

HyperMesh Tcl Modify

Description

This command replaces a single component.

Inputs

mode
The replace mode. Valid values are:
  • 0 – Undo/reject replace operation.
  • 1 – Initial replace operation.
  • 2 – Finish/accept replace operation.
entity_type
The type of entity to replace. Currently only supported for comps.
existing_id
The ID of the existing/old entity.
incoming_id
The ID of the incoming/new entity.
string_array
The ID of the string array that contains the input options. The string array is created using the *createstringarray command. This should always be set to 1.
The supported options and values are:
tolerance=value
The replacement tolerance. Right now it is a global tolerance, meaning the same tolerance is applied for all replace entities. The default is 0.01.
keep_src_prop=value
0 – Do not reuse/keep the property assigned to the outgoing component (default)
1 – Reuse/ assign property of source component to the outgoing component.
keep_src_mat=value
0 – Do not reuse/keep the material assigned to the outgoing component (default)
1 – Reuse/assign material of source component to the outgoing component.
keep_src_comp_cardimage=value
0 – Do not reuse/keep the card image assigned to the outgoing component (default)
1 – Reuse/ assign source component card image to the outgoing component.
keep_src_include=value
0 – Do not organize the incoming component to the outgoing component include (default)
1 – Organize the incoming component and its nodes/elements/reference entities to the outgoing component include.
log_file=value
If a log file is desired, value should be set to the full path and file name to write to.
number_of_strings
Integer indicating the size (number of strings) in the string array created using *createstringarray.

Example

To replace component 301 with component 501 using a tolerance of 0.5, keeping the source material, property and card image:

*createmark comps 1 100
*replacesetentitydata componentmark=1 componentpairingstring={{301 501}}
*createstringarray 4 "tolerance=0.5" "keep_src_prop=1" "keep_src_mat=1" "keep_src_comp_cardimage=1"
*replacentitywithentity 1 comps 301 501 1 4

Errors

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:
if { [ catch {command_name...} ] } {
   # Handle error
}

Version History

13.0

2017.2 - This command used to work independently, but must now be preceded by a call to *replacesetentitydata.