*CE_GlobalSetInt

Set global integer parameters relating to the display of connectors.

Syntax

*CE_GlobalSetInt name value

Type

HyperMesh Tcl Modify

Description

This command sets global integer parameters to control the display of connectors.

Inputs

name
The name of the parameter to set:
g_ce_colorby
Determines the connector coloring:
  • 0 - by state
  • 1 - by component
  • 2 - by layer
  • 3 - by style
Range: 0 - 3
g_ce_realizedvis
Turn off/on realized connectors
Range: 0, 1
g_ce_unrealizedvis
Turn off/on unrealized connectors.
Range: 0, 1
g_ce_failedvis
Turn off/on failed connectors.
Range: 0, 1
g_ce_modifiedvis
Turn off/on modified connectors.
Range: 0, 1
g_ce_lt2tvis
Turn off/on connectors with fewer than 2 layers.
Range: 0, 1
g_ce_2tvis
Turn off/on connectors with 2 layers.
Range: 0, 1
g_ce_3tvis
Turn off/on connectors with fewer than 3 layers.
Range: 0, 1
g_ce_gt3tvis
Turn off/on connectors with 3 layers.
Range: 0, 1
g_ce_spotvis
Turn off/on spot connectors.
Range: 0, 1
g_ce_seamvis
Turn off/on seam connectors.
Range: 0, 1
g_ce_areavis
Turn off/on area connectors.
Range: 0, 1
g_ce_boltvis
Turn off/on bolt connectors.
Range: 0, 1
g_ce_applymassvis
Turn off/on apply mass connectors.
Range: 0, 1
g_skip_imprint
Skip the imprint run and places the imprint elements in a separate component when set to 1.
Range: 0, 1
g_do_strict_imprint
Resolve conflicts during the mesh imprint when set to 1.
Range: 0, 1
g_do_keep_snap
Snap to an edge or feature during mesh imprint when set to 1.
Range: 0, 1
g_ce_boltcylinderdisplaystatus
Display status:
  • 0 - Bold on
  • 1 - Bolt dynamic
  • 2 - Bolt off
Range: 0 - 2
g_ce_boltcylinderdisplaytransparency
Set the transparency for the bolt cylinder.
Range: 0 - 10
value

Examples

*CE_GlobalSetInt g_ce_colorby 1

Version History

9.0