*CE_ReviewConnectors

Review connectors according to user options.

Syntax

*CE_ReviewConnectors mark_id operation_type string_array number_of_strings output_mark

HyperMesh Tcl Modify

Review connectors according to user options.

mark_id

The ID of the mark to review. Valid values are 1 and 2.

operation_type

The string for the type of operation to be performed:

findlinks

hide

isolate

isolateonly

show

To operate on twin connectors:

twince_hide

twince_isolate

twince_isolateonly

twince_show

string_array

A string array containing any additional input parameters, created using*createstringarray. This must be set to 1.

The strings are generally IDs/names/UIDs based on the link_rule.

consider_geom=<value>: Defines if geometry is also considered along with elements during show/hide/isolate operations. Valid values are true and false.
consider_HAZ_elems=<value>: Defines if HAZ (Heat Affected Zone) elements should also be considered during show/hide/isolate operations. The possible values are true and false.
find_twince_option=<value>: Find twin connectors according to:; 1 - Minimum two links; 2 - Exact links
filter_projection_entities=<value>: Filters links to the projection entities during show/hide/isolate operations, according to following options which are possible values:; 0 - None; 1 - Projection components; 2 - Projection elements; 3 - Projection and attached elements

number_of_strings

Integer indicating the size (number of strings) in the string_array created using *createstringarray.

output_mark

The ID of the mark onto which reviewed entities are placed. Valid values are 1 and 2.

To isolate connector with ID 5:

*createmark connectors 1 5
*createstringarray 1 "consider_HAZ_elems=true"
*CE_ReviewConnectors 1 isolate 1 2 2

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

2019