*surfacemarkaddnodesfixed

Add fixed points to a surface at locations specified by nodes.

Syntax

*surfacemarkaddnodesfixed surf_mark_id node_mark_id tol reserved_1

HyperMesh Tcl Modify

Add fixed points to a surface at locations specified by nodes.

surf_mark_id: ID of the mark containing the input surfaces to add fixed points to. Valid values are 1 and 2.
node_mark_id: ID of the mark containing the nodes to use to define the fixed point locations. Valid values are 1 and 2.
tol: Tolerance value used to determine if a node is close enough to a surface.
reserved_1: Reserved parameter, must be set to 0.

To add fixed points to the surface with ID 12 at positions specified by nodes with IDs 1 and 2:

*createmark nodes 1 1 2
*createmark surfs 1 12
*surfacemarkaddnodesfixed 1 1 0.1 0

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}