*meshline_create_from_plot_elements

Creates meshlines from selected plot elements.

Syntax

*meshline_create_from_plot_elements mark_id reserved1 reserved2 reserved3 reserved4 reserved5 reserved6

HyperMesh Tcl Modify

This command creates meshlines from selected plot elements.

mark_id: The ID of the mark containing the plot elements. Valid values are 1 and 2.
reserved1: Reserved for future use. Must be set to 0.
reserved2: Reserved for future use. Must be set to 0.
reserved3: Reserved for future use. Must be set to 0.
reserved4: Reserved for future use. Must be set to 0.
reserved5: Reserved for future use. Must be set to 0.
reserved6: Reserved for future use. Must be set to 0.

To create meshlines from all displayed plot elements:

*createmark elems 1 displayed
*meshline_create_from_plot_elements 1 0 0 0 0 0 0

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

11.0