*beamsectioncreatestandardsolver

Creates a standard solver-specific HyperBeam section.

Syntax

*beamsectioncreatestandardsolver type solver type_name orient

HyperMesh Tcl Modify

Creates a standard solver-specific HyperBeam section. For a list of values that are supported by each solver, see the topics in the See Also section.

type: Integer indicating the type of section to create. Each solver has a number of available sections.
solver: Integer indicating the solver the section is being created for. Valid values are:; 0 – HyperBeam; 1 – OptiStruct/Nastran; 2 – Abaqus; 8 – ANSYS; 9 – LS-DYNA; 21 – Permas; 22 – Madymo
type_name: Name indicating the type of section to create. Each type can have multiple available section names.
orient: Flag indicating the orientation of the section:; 0 – 0 degrees; 1 – 90 degrees; 2 – 180 degrees; 3 – 270 degrees

To create a standard HyperBeam T-section having a 0 degree orientation:

*beamsectioncreatestandardsolver 1 12 I 0

To create a standard OptiStruct T-section having a 0 degree orientation:

*beamsectioncreatestandardsolver 15 0 HMTSec 0

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

9.0