*midsurface_clear_plate_info

Deletes the plate and thickness information from selected surfaces.

Syntax

*midsurface_clear_plate_info mark_id reserved1 reserved2

HyperMesh Tcl Modify

Deletes the plate and thickness information from selected surfaces, which was created via previous midsurface runs, or via plate edit commands.

mark_id: The ID of the mark containing the surfaces to clear. Valid values are 1 and 2.
reserved1: Reserved for future use. Must be set to 0.
reserved2: Reserved for future use. Must be set to 0.

To delete the plate and thickness information from surfaces with ID 5-7:

*createmark surfs 1 5-7
* midsurface_clear_plate_info 1 0 0

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

2019