*meshline_create_from_points

Creates meshlines from a node list.

Syntax

*meshline_create_from_points list_id reserved1 reserved2 reserved3 reserved4 reserved5 reserved6

HyperMesh Tcl Modify

This command creates meshlines from a node list.

list_id: The ID of the list containing the nodes. Valid values are 1 and 2.
reserved1: Reserved for future use. Must be set to 0.
reserved2: Reserved for future use. Must be set to 0.
reserved3: Reserved for future use. Must be set to 0.
reserved4: Reserved for future use. Must be set to 0.
reserved5: Reserved for future use. Must be set to 0.
reserved6: Reserved for future use. Must be set to 0.

To create meshlines from nodes 470, 480, 475 and 485:

*createlist nodes 1 470 480 475 485
*meshline_create_from_points 1 0 0 0 0 0 0

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

11.0