*adjustcontactsurfacenormal

Adjusts a contact surface normal using an orientation element.

Syntax

*adjustcontactsurfacenormal name mark_id elem_flag orientation_element reverse_normal

HyperMesh Tcl Modify

Adjusts a contact surface normal using an orientation element.

name: The name of the contact surface entity to adjust.
mark_id1: The ID of the mark of elements to adjust, when flag is 1. Valid values are 1 and 2.
elem_flag: Flag for reversing the contact normal of all or individual elements of the contact surface.; 0 - All elements, mark_id is ignored; 1 - Individual elements, mark_id is used.
orientation_element: The ID of the shell element that should be used for shell contact surface normal correction on shell face. This element should be part of the selection.
reverse_normal: 0 – Correct contact normal along the direction of orientation_element normal (default); 1 - Correct contact normal opposite to the direction of orientation_element normal

To adjust the normal of contactsurf "test" for the elements on mark 1 in the normal direction of reference element id 23:

*createmark elems 1 12 29 53 23
*adjustcontactsurfacenormal "test" 1 1 23 0

To adjust the normal of contactsurf "test" for the elements on mark 1 in the reverse normal direction of reference element id 23:

*createmark elems 1 12 29 53 23
*adjustcontactsurfacenormal "test" 1 1 23 1

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

14.0.130