Rebuild Mesh Panel

Use the Rebuild Mesh panel to streamline the process of remeshing existing meshes to generate a new mesh with good quality and flow.

The rebuild mesh functionality utilizes the same parameter and criteria files used by Batchmesher to define the quality criteria and relevant mesh parameters. This algorithm saves significant time over the traditional automesh and quality correction approach.

The rebuild algorithm is useful for many different applications.
  • Remesh to adjust size, quality, and flow.


    Figure 1. Before


    Figure 2. After
  • Change to a different element type.


    Figure 3. Before


    Figure 4. After
  • Add or remove washer layers around holes, change the nodal density of a hole, adjust a hole diameter, or remove a hole.


    Figure 5. Before


    Figure 6. After
  • Locally correct areas with bad mesh flow.


    Figure 7. Before


    Figure 8. After

Rebuild is currently supported for first-order FE meshes that are not attached to 3D element faces. 1D features (plot elements) are important for defining the mesh topology of FE. These features are utilized as vertices, edges and faces, in a similar way to geometry, during the rebuild operation. Such features are generated automatically by the midmesh tool, via the features panel, or can be manually created. If 1D features are not defined on the mesh, they will be automatically generated internally. Nodes of input elements may or may not be associated to geometry. Rebuild maintains node-geometry associativity in the regions of input mesh where the association is present.

Update several options from the parameter file to control the resulting rebuild mesh output.

Option Action
Element size Define target element size.
Element Type Define target element type.
Feature angle Define the feature and vertex angle used for auto generating 1D features, when required.
Surface hole recognition Define the parameters for performing hole treatment for circular holes.