Permas
Errors
| Name | Description | Result | Auto correction action | Manual correction action |
|---|---|---|---|---|
| Youngs modulus and poissons ratio is not defined | Checks if Youngs modulus has been defined for materials. | Lists all materials that do not have Youngs modulus defined. | Not supported. | Opens the Material panel. |
| Poisson Ratio is not defined | Check if Poissons ratio has been defined for materials. | Lists all materials that do not have Poissons ratio defined. | Not supported. | Opens the Material panel. |
| Density is not defined | Checks if density has been defined for materials. | Lists all materials that do not have density defined. | Not supported. | Opens the Material panel. |
| Shell properties without thickness | Checks if thickness has been defined for shell properties. | Lists all shell properties that do not have thickness defined. | Not supported. | Opens the Property panel. |
| Component with missing material | Checks if components are assigned a material. | Lists all components that do not have a material assigned. | Not supported. | Opens the Component panel. |
| Component with missing property | Checks if components are assigned a property. | Lists all components that do not have a material assigned. | Not supported. | Opens the Component panel. |
| Component with solid and shells | Checks if a component consists of both solid and shell elements. | Lists all failing components. | Not supported. | Opens the Organize panel. |
| MPC (RBE2) with free dependent node | Checks if dependent nodes of MPC (RBE2) are free. | List all failing MPC (RBE2) elements. | Not supported. | Deletes the link between the independent node and free dependent node. |
| MPC (RBE3) with free independent node | Checks if independent nodes of MPC (RBE3) are free. | List all failing MPC (RBE3) elements. | Not supported. | Deletes the link between the independent node and free dependent node. |
Errors
| Name | Description | Result | Auto correction action | Manual correction action |
|---|---|---|---|---|
| Unused materials | Checks for materials that are not referenced by a component. | Lists all unused materials. | Deletes unused materials. | Not supported. |
| Unused properties | Check for properties that are not used in the model. | Lists all unused properties. | Deletes unused properties. | Not supported. |
| Property is missing a card image | Checks for properties that do not have a card image. | List all properties that do not have card images. | Not supported. | Opens the Property Create panel. |
| Property missing mass value | Checks if mass properties that do not have element mass defined. | Lists all Mass properties that do not have mass assigned. | Not supported. | Opens the Property panel. |
| Damper property is missing Damping and Mass value | Checks if Damper properties are missing the Damping or Mass value. | Lists all Damper properties that do not have damping/mass assigned. | Not supported. | Opens the Property panel. |
| Beam Property missing HyperBeam Section | Checks if Beam propertiesare missing HyperBeam sections. | Lists all Beam properties that do not have beam section properties assigned. | Not supported. | Opens the Property panel. |
| Empty Components | Checks if components have one or more elements. | Lists all components that do not have elements. | Deletes empty components. | Not supported. |
| Unsed Sets | Check if sets are not used in the model. | Lists all unused sets. | Deletes empty sets. | Not supported. |
| Empty sets | Check if sets are empty. | List empty sets. | Deletes empty sets. | Not supported. |
| Empty groups | Checks if groups have either a master entity or slave entity that are assigned a contact surface/set. | Lists all groups with missing master and slave entities. | Deletes empty groups. | Not supported. |
| Empty contactsurfs | Checks if contactsurfs are assigned any elements. | Lists all empty contactsurfs. | Deletes empty contactsurfs. | Not supported. |
| Unused Sections | Check if there are any unused Beamsections defined in the model. | List all unused Beamsection collectors in the model. | Deletes unused beamsections. | Not supported. |
| Empty loadcollectors | Checks if there are any loads in the load collectors. | Lists all loadcollectors that do not have loads. | Deletes empty loadcollectors. | Not supported. |
| Empty Vectorcollectors | Checks if there are any empty vector collectors. | Lists all empty vectors. | Deletes empty vectors. | Not supported. |
| Empty assemblies | Checks if there are any empty assemblies. | Lists all empty assemblies. | Deletes empty assemblies. | Not supported. |
Info
| Name | Description | Result | Auto correction action | Manual correction action |
|---|---|---|---|---|
| Number of Material | Checks for the number of material entities in the model. | Lists all materials in the model. | Not supported. | Not supported. |
| Number of Properties | Checks for the number of property entities in the model. | Lists all properties in the model. | Not supported. | Not supported. |
| Number of Comp | Checks for the number of component entities in the model. | Lists all components in the model. | Not supported. | Not supported. |
| Number of Groups | Checks for the number of group entities in the model. | Lists all groups in the model. | Not supported. | Not supported. |
| Number of sets | Checks for the number of set entities in the model. | Lists all sets in the model. | Not supported. | Not supported. |
| Number of Steps | Checks for the number of step entities in the model. | Lists all steps in the model. | Not supported. | Not supported. |