masses

Unless otherwise specified, data names are accessible in level 3 only.

activesuppressed

Returns non-zero if the entity is set inactive, 0 otherwise. Type: integer

attached_location_tolerance

The attached location tolerance value. Type: double

attachmentmode

True if manual mode, false if automatic mode. Type: Boolean

attributesmax

The number of attributes owned by this entity. Type: unsigned int.

c

The global components of motion that have weighting factor WTi, at grid points Gi,j. Any of the digits 1, 2, ..., 6, with no embedded blanks. This is an attribute for Nastran. Type: integer

calculatenode

True if the center of attachment nodes location is calculated, false if the mass location is selected as a node. Type: Boolean

CID

The coordinate system identification number. Default = 0, must be > -1. This is an attribute for Nastran. Type: integer

CIDOption

True when CID is enabled, false otherwise. This is an attribute for Nastran. Type: Boolean

CM

The components of motion at GMi in the redefined dependent degree-of-freedom set. Any of the digits 1 through 6, with no embedded blanks. This is an attribute for Nastran. Type: integer

color

The color of the entity. Type: integer

concentric_offset_tolerance

The concentric offset tolerance value. Type: double

config

The configuration of the entity. Type: integer

1 - Point mass

2 - Rigid mass

3 - NSM

definedentity

True if the entity is defined, false otherwise. Type: Boolean

distribution_type

The distribution type Type: unsigned int.

0 - Apply to all nodes

1 - Divide mass by nodes

2 - Divide mass by area

3 - Unit area distribution

entityoption

The entity selection option for NSM config Type: unsigned int.

0 - All

1 - Element

2 - Property

hole_distance_tolerance

The hole distance tolerance value. Type: double

I11

The mass moment of inertia measured at the mass center of gravity. This is an attribute for Nastran. Type: double

I21

The mass moment of inertia measured at the mass center of gravity. This is an attribute for Nastran. Type: double

I22

The mass moment of inertia measured at the mass center of gravity. This is an attribute for Nastran. Type: double

I31

The mass moment of inertia measured at the mass center of gravity. This is an attribute for Nastran. Type: double

I32

The mass moment of inertia measured at the mass center of gravity. This is an attribute for Nastran. Type: double

I33

The mass moment of inertia measured at the mass center of gravity. This is an attribute for Nastran. Type: double

id

The ID of the entity. Type: entity

include

The ID of the include file the entity is organized in. Type: entity

includeid

The ID of the include file the entity is organized in. Type: unsigned int.

inertia

True when the intertia values are defined, false otherwise. Type: Boolean

internalid

The ID of the entity. Type: unsigned int.

magnitude

The mass magnitude. Type: double

massdisplaylocation

The mass display location entity IDs (nodes, elements, components or properties). Type: entity array

masslocation

The mass location region IDs. Type: entity array

name

The name of the entity. Type: string

nsm_distribution_type

The NSM distribution type. Type: unsigned int.

0 - Total mass

1 - Per unit area/length

outputsuppressed

Returns non-zero if the entity is set "do not export", 0 otherwise. Type: integer

percentage_area_remapping

The percentage area remapping. Valid for massdisplaylocation of elements. Type: double

planer_angle_tolerance

The planer angle tolerance. Type: double

propertyname

The property name stored as ghost to remap property if reconnect_rule = 2. Type: string array

propertypoolid

The property pool number stored as ghost to remap property if reconnect_rule = 1. Type: unsigned int array.

propertysolverid

The property ID stored as ghost to remap property if reconnect_rule = 1. Type: unsigned int array.

propertytype

The NSM property type. Type: unsigned int.

0 - PSHELL

1 - PSHEAR

2 - PCOMP

3 - Element

realization

The realization entities. Type: entity array

realization_zone

The rigid mass realization zone. Type: unsigned int.

0 - Inside/outside

1 - Inside

2 - Outside

realizationtype

The rigid mass realization type. Type: unsigned int.

0 - RBE2

1 - RBE2 link

2 - RBE3

3 - RBE3-RBE2

4 - RBE3-RBE2 link

realize_status

The realization status. Type: unsigned int.

0 - Unrealized

1 - Realized

2 - Failed

3 - Modified

realizedfecomponent

The realization FE component ID when realizedfecomponentoption is 2. Type: entity

realizedfecomponentoption

The realization FE component option. Type: unsigned int.

0 - Auto

1 - Realize FE to current component

2 - Realize FE to selected component

3 - Realize FE to original component

reconnect_rule

The reconnect rule for property and component. Type: unsigned int.

0 - None

1 - By ID

2 - By name

refc

The global components of motion whose values are computed at the reference grid point. Any of the digits 1 through 6, with no embedded blanks. This is an attribute for Nastran. Type: integer

rigidmassdisplaylocation

The rigid mass display location node ID. Type: entity

rigidmasslocation

The rigid mass attachment location node ID. Type: entity

toleranceflag

True if tolerance is set, false otherwise. Type: Boolean

totalmass

The total mass value. Type: double

WT

The weighting factor for components of motion. This is an attribute for Nastran. Type: double

X1

The offset distance from the grid point to the center of gravity of the mass in the coordinate system defined by CID, unless CID = -1, in which case X1, X2, and X3 are the coordinates (not offsets) of the center of gravity of the mass in the basic coordinate system. Default = 0.0. This is an attribute for Nastran. Type: double

X2

The offset distance from the grid point to the center of gravity of the mass in the coordinate system defined by CID, unless CID = -1, in which case X1, X2, and X3 are the coordinates (not offsets) of the center of gravity of the mass in the basic coordinate system. Default = 0.0. This is an attribute for Nastran. Type: double

X3

The offset distance from the grid point to the center of gravity of the mass in the coordinate system defined by CID, unless CID = -1, in which case X1, X2, and X3 are the coordinates (not offsets) of the center of gravity of the mass in the basic coordinate system. Default = 0.0. This is an attribute for Nastran. Type: double