general
General defaults for the Model Verification instance.
GUI Settings
- project
- Project name displayed in PowerPoint report
- action
- Type or Run to be selected.
- auto-close
- After the check and report is complete the GUI will be closed automatically if this is ON.
- number-of-processes
- Number of parallel processing to be executed. It is advised to keep 2 CPUs for System purpose.
- number-of-processes-max
- Maximum number of parallel processor allowed (Total # CPUs – 2).
- assembly-level
- This value indicates the number of level above the part to be considered as Assembly Name. Assembly name is used in Intersection, Comparison, Reports. Parts will be skipped if the base, variant assembly names are not same during Comparison.
- metalTrim-level
- This value indicates the number of level above the part to be considered
as Sheet Metal or TRIM Name.
- METAL-METAL
- All the parts inside the METAL folder will be checked.
- TRIM-TRIM
- All the parts inside the TRIM folder will be checked.
- METAL-TRIM
- Parts across METAL and TRIM folder will be checked. No check will be executed inside the METAL or TRIM folders.
- port
- This value to be edited incase of specific port is needed for Thread communication.
- timezone
- Not valid.
- deleteLogFiles
- Deletes all of the scratch files after the report generation. All of the XML, HM, Image files will remain if this is OFF.
- maxloopcount
- Maximum number of recovery limits in case of crash or application hanging.
- wait-time
- Maximum wait time for a process to wait for a check per part or pair of part.
- progress-time-scale
- Progress bar interval, do not reduce but can increase the value.
- configa-application
- File extension of Parasolid children file.
- Model / Preview / Import-type
- When preview huge CAD data, the CAD option allow to read the CAD as it is. The Facet option reads CAD by converting to Facets, this is done for the performance and visualization purpose.
Representation Settings
- reptype-name / CAD
- Allowable representation type for original CAD data read. Do not change.
- reptype-name / Common Midsurface
- Allowable representation type for Midsurface data. Do not change.
- reptype-name / FE
- Allowable representation type for FEM data. Do not change.
Solid Recognition
- model / close-shell / free-edge-allowance
- Allowable number of free edges, if actual number of free edges in the CAD is less than this value is solid CAD data.
- model / close-shell / mesh / free-edge-allowance
- Allowable distance between two nodes to be automatically equivalenced or stitched.
auto-rename
- tool / auto-rename
- CAD Name will be assign to Part Name of the browser by considering below string pattern.
auto-renumber
- tool / auto-renumber
- CAD Name will be assign to PID of the browser by considering below string pattern. By default the IDs will be renumbered from 1. This must be turned OFF if the PID and Part Names are managed in CAD attributes.
- type
- Part name subexpression along with PID value will be assigned.
- start-with
- Part name subexpression along with PID value will be assigned.
- increment
- Part name subexpression along with PID value will be assigned.
- rename / part-id / pattern
- Decimal value, except excluding first 0 will be read from file name and assigned as PID.
- rename / part-id / format
- Regular subexpression will be used.
- rename / part-name / pattern
- String value will be read from file name and assigned as PartName.
- rename / part-name / format
- Part name subexpression along with PID value will be assigned.
- pName To PID map
- Below Letter to Integer table is used while renumbering the PID if ON. The normal auto-renumber will be applied if OFF.
- Letter to integer map
- Mapping table to change string value to decimal value for the PID Column.
- String-length
- Number of digits to be considered for the Renumber using mapping table.