fe
Specify defaults for FE model solver types, version and file extensions.
Settings
- type
- Supported CAD file format.
- dyna
- File extension of LS-DYNA input file, user can add many extensions for this type.
- nastran
- File extension of Nastran input file, user can add many extensions for this type.
- pam
- File extension of PAM-CRASH input file, user can add many extensions for this type.
- radioss
- File extension of Radioss input file, user can add many extensions for this type.
- abaqus
- File extension of Abaqus input file, user can add many extensions for this type.
- optistruct
- File extension of OptiStruct input file, user can add many extensions for this type.
- connector
- File extension of Connector input file used for Spot weld check and Spot comparison function. If the type specified here and the actual file extension are not matching, the Check will not be executed.
- hypermeshcad
- File extension of HyperMesh file contains only Mesh.
Import Settings
- fe-attached
- Parts with node sharing are organized to one part if the thickness of these parts are not same. The organization will not be executed if the thickness of these parts are same.
- fe-dettach
- LH and RH parts will be separated two separated physical part incase these two parts are organized in to one part.
- importby
- While importing fe data in to HyperMesh creating components by reading HyperMesh Comments or by reading HyperMesh information managed in HyperMesh file.
- Include-stamping
- Reads stamping results information like Element shell thickness from the solver deck. This information will be used for mass calculation. Property thickness will be ignoredm if this option is ON.
- dummy-thickness
- Assigns a dummy thickness for the FE data in case the thickness no thickness or property assigned to the part. This dummy thickness is needed for CAD solid vs FE comparison in case no thickness exist from the original FE.