Create Process with Math Tasks

Before you begin, complete the steps in Run Math Tasks, and then drag and drop two more MathTasks into the Process Modeling window.
  1. Connect the blocks: Click the output port of the first block, and then click the input port of the second block.
    A blue highlighted line appears after you click one port and then move toward the next port. Once you click the second port, the blue line turns black letting you know that the blocks are connected.
  2. Connect the second and third block.
    Your process should look something like this:


    Figure 1.
  3. On the toolbar, click to execute the math process.
  4. In the command window, verify the values for each of the three tasks:


    Figure 2.