MBACT
Bulk Data Entry Defines the entity/set that needs to be activated in the multibody system for the subsequent simulation.
Format
| (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) |
|---|---|---|---|---|---|---|---|---|---|
| MBACT | ID | ETYPE | ID1 | ID2 | ID3 | etc |
or
| (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) |
|---|---|---|---|---|---|---|---|---|---|
| MBACT | ID | ETYPE | IDST | THRU | IDEND |
Example
| (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) |
|---|---|---|---|---|---|---|---|---|---|
| MBACT | ID | MOTION | 92 |
Definitions
| Field | Contents | SI Unit Example |
|---|---|---|
| ID | Unique identification number. (Integer > 0) |
|
| ETYPE | Entity type that needs to be activated.
|
|
| ID1, ID2, ... | Entity/Set IDs that need to be
activated. (Integer > 0) |
|
| IDST | Entity/Set ID range start. (Integer > 0) |
|
| THRU | Keyword to indicate entity/set ID range is specified. | |
| IDEND | Entity/Set ID range end. (Integer > IDST) |
Comments
- This card is represented as a load collector in HyperMesh.