HyperView 2019 Stereoscopic 3D Setup

This section describes what is needed for enabling and displaying HyperView in stereoscopic 3D.

HyperView was tested using NVIDIA and AMD hardware and recommendations below are also located at www.nvidia.com/object/3d-vision-main.html or www.amd.com/us/products/technologies/amd-hd3d/Pages/hd3d.aspx.

Requirements

  1. A display capable of displaying 120Hz or higher refresh rates
    1. If using a regular display monitor then an IR emitter and corresponding glasses, like the NVIDIA 3D vision kit, maybe required in order to view 3D images.
  2. A compatible 3D TV using AMD HD3D or the NVIDIA 3DTV Play software drivers or NVIDIA’s 3D Vision Kit
    1. NVIDIA 3D:

      A complete list of TVs and cards can be found here:

      http://www.nvidia.com/object/3d-vision-displays.html

      http://www.nvidia.com/object/3d-vision-geforce-cards.html

      http://www.nvidia.com/object/quadro_pro_graphics_boards.html

    2. AMD HD3D:

      A complete list of TVs can be seen here:

      http://www.nvidia.com/object/3d-vision-displays.html

  3. A driver version of 197.03 or newer (recommend the 320.00 driver, or newer) for NVIDIA cards and 9.003.3.3 or higher for AMD cards should be used.
    Note: In order to work with a 3DTV, the software from NVIDIA called “3DTV Play” will need to be installed. It comes with the 3D vision kit or can be purchased separately. More information can be found here: http://www.nvidia.com/object/3dtv-play-overview.html
  4. Minimum Operating System requirements and hardware from NVIDIA and AMD:
    1. Microsoft Windows Vista or 7 (64-bit)
    2. Intel Core 2 Duo or AMD Athlon X2 CPU or higher
    3. 1 GB or system memory (2 GB recommended)
    4. 100 MB hard disk free